Back to Blog
How-to Guides 2026-11-17 CRKD 0 views

Nitro Deck+ Fortnite Renegade Raider Bundle: Setup and Carry Guide

Nitro Deck+ Fortnite Renegade Raider Bundle: Setup and Carry Guide

A practical walkthrough for the Nitro Deck+ Fortnite Renegade Raider bundle: docked HDMI setup, stick top swaps, and packing the Pro Gear Bag with confidence.

What this bundle gives you for setup and travel

The Nitro Deck+ Fortnite Renegade Raider Edition bundle pairs the handheld deck with an HDMI adapter, a CRKD Pro Gear Bag in Charcoal Grey, and an 8-pack of Stick Tops in Midnight Edition. That means you can set up for docked play, swap your thumbstick tops, and carry the whole kit without buying extras separately.

The Nitro Deck+ itself is built for the Nintendo Switch and Switch OLED Model, with hall-effect thumbsticks, programmable side kick buttons, re-mappable back buttons, and a USB-C connection for low latency. The bundle record also confirms docked mode compatibility via the included HDMI adapter. Use this guide to work through the practical steps in a sensible order.

Bundle contents at a glance

How to set up the HDMI adapter for docked play

The bundle includes a USB-C HDMI adapter, and the product record confirms docked mode compatibility. Follow these steps to connect your Nitro Deck+ to a TV or monitor.

  1. 1. Connect the HDMI adapter to the Nitro Deck+: Plug the adapter into the USB-C port on the Nitro Deck+. The deck supports pass-through charging, so you can keep power connected if needed.
  2. 2. Connect an HDMI cable to your TV: Run an HDMI cable from the adapter to an available HDMI input on your TV or monitor. The bundle record confirms the adapter provides HDMI output for docked mode.
  3. 3. Select the correct input: Use your TV remote to switch to the HDMI input you used. The Nitro Deck+ is designed to output video when docked via the adapter.
  4. 4. Pair your controller if needed: The Nitro Deck+ can be used as an extra controller. If you prefer to play with the deck separate from the TV, the Bluetooth connection is available for the CRKD Companion App, not necessarily for controller use. Check the app for supported controller modes.

A note on HDMI adapter setup and what the catalog confirms

The supplied record lists "USB-C HDMI Compatibility for Docked Mode" and includes an HDMI adapter in the bundle. It does not specify a required HDMI cable version, resolution, or refresh rate. For those details, rely on the documentation that comes with your TV and the adapter. The key supported fact is that the adapter is intended to enable docked mode output.

If you plan to use the Nitro Deck+ as a controller while docked, the record confirms it can be used as an extra controller, but it does not detail the pairing process for that specific mode beyond Bluetooth being available for the app. Start with a direct USB-C connection for lowest latency.

How to install the Midnight Edition stick tops

The bundle includes an 8-pack of Stick Tops designed to keep your CRKD controllers feeling and looking fresh. The Nitro Deck+ has swappable stick tops. Here is a safe way to change them.

  1. 1. Power off and remove the deck from any adapter: Turn off the Nitro Deck+ and unplug the HDMI adapter before handling the thumbsticks.
  2. 2. Grip the existing stick top firmly: Pull the old stick top straight up. The swappable design means it should come off without twisting. If it feels stuck, check for any debris around the base.
  3. 3. Align the new stick top: Press the Midnight Edition stick top onto the stick shaft, aligning any keyed shape. Push down until it seats evenly.
  4. 4. Test movement: Rotate the stick through its full range to confirm it moves freely and does not rub. The hall-effect sensors are sealed, so no calibration is needed for a top swap.

Packing the Pro Gear Bag for travel

The CRKD Pro Gear Bag is described as compatible with Nitro Deck, NEO S, Nitro Deck+, Steam Deck OLED, Nintendo Switch, Legion Go, PlayStation Portal, Asus Rog, controllers, 65% keyboards, gaming mice, and accessories. That breadth means you can organize the bag for more than just the deck. Use these tips to pack the Renegade Raider bundle securely.

  • Deck first: Place the Nitro Deck+ in the main compartment. The bag is designed to accommodate the deck, so it should fit without forcing.
  • Adapter and cables in a pocket: Keep the HDMI adapter and any USB-C cable in a separate pocket or pouch to avoid scratching the deck's screen or body.
  • Stick tops in a small bag: The 8-pack of stick tops is small; a zippered inner pocket keeps them from getting lost.
  • Avoid overstuffing: The bag is compatible with many devices, but packing it too full can reduce protection. Leave some room around the deck.

Compatibility and care details worth knowing

What the catalog does not confirm about setup

The supplied record does not include step-by-step instructions for pairing the Nitro Deck+ as a Bluetooth controller, nor does it specify HDMI cable requirements or supported resolutions. It also does not confirm whether the HDMI adapter supports pass-through charging simultaneously. For those details, check the documentation included with your bundle or the CRKD Companion App.

The record does confirm that the Nitro Deck+ connects to the CRKD Companion App via Bluetooth, and that each product can be registered via the True Collection System to reveal its number and rarity rank. That registration is optional but can be a useful record of your Renegade Raider Edition.

Related Articles

Customer Service
Home
Products
Cart
Profile